How to Send Large Amount Of Data in WCF(Streaming),Upload/Download Files Over HTTP

I have tried to transfer large files over HTTP to/from WCF, but I have faced problems in that I was not able to upload files more than 45 KB in size, I have tried many configuration setting combinations and finally succeeded in transferring large files (I have tested up to 1GB on IE6).

To transfer large files using “WCF service + HTTP”, we can use the following types of bindings:

1.  wsHttpBinding

2.  basicHttpBinding   

        In wsHttpBinding, we can set the transfermode attribute as Buffered, but there is a disadvantage in using this approach for large files, because it needs to put the entire file in memory before uploading/downloading, A large buffer is required on both the web client and the WCF service host. However, this approach is very useful for transferring small files, securely.

In basicHTTPBinding we can use the transfermode as Streamed so that the file can be transferred in the form of chunks. We have to ensure additional security mechanisms for transferring chunks. The security mechanisms are not explained in this posting.

Create WCF Contract with Use Of Interface:-

Create a new “WCF Service” project. Create a new service with the name TransferService. Now we will see an interface file “ITransferService” and a class file TransferService.cs. ITransferService should have two methods, one for upload and one for download.

WCF Service Sample Interface Code:

[ServiceContract]

public interface ITransferService

{

    [OperationContract]

    RemoteFileInfo DownloadFile(DownloadRequest request);

    [OperationContract]

     void UploadFile(RemoteFileInfo request);

}

[MessageContract]

public class DownloadRequest

{

    [MessageBodyMember]

    public string FileName;

}

[MessageContract]

public class RemoteFileInfo : IDisposable

{

    [MessageHeader(MustUnderstand = true)]

    public string FileName;

    [MessageHeader(MustUnderstand = true)]

    public long Length;

    [MessageBodyMember(Order = 1)]

    public System.IO.Stream FileByteStream;

    public void Dispose()

    {

        if (FileByteStream != null)

        {

            FileByteStream.Close();

            FileByteStream = null;

        }

    }  

}

WCF Service Sample Interface Implementation Code:-

public RemoteFileInfo DownloadFile(DownloadRequest request)

{

    RemoteFileInfo result = new RemoteFileInfo();

    try

    {

   string filePath = System.IO.Path.Combine(@"c:\Uploadfiles", request.FileName);

        System.IO.FileInfo fileInfo = new System.IO.FileInfo(filePath);

        // check if exists

        if (!fileInfo.Exists)

    throw new System.IO.FileNotFoundException("File not found",request.FileName);

        // open stream

        System.IO.FileStream stream = new System.IO.FileStream(filePath,

                  System.IO.FileMode.Open, System.IO.FileAccess.Read);

            // return result

            result.FileName = request.FileName;

            result.Length = fileInfo.Length;

            result.FileByteStream = stream;

        }

        catch (Exception ex)

        {

        }

        return result;

    }

    public void UploadFile(RemoteFileInfo request)

    {

        FileStream targetStream = null;

        Stream sourceStream =  request.FileByteStream;

        string uploadFolder = @"C:\upload\";

        string filePath = Path.Combine(uploadFolder, request.FileName);

        using (targetStream = new FileStream(filePath, FileMode.Create,

                              FileAccess.Write, FileShare.None))

        {

            //read from the input stream in 65000 byte chunks

            const int bufferLen = 65000;

            byte[] buffer = new byte[bufferLen];

            int count = 0;

            while ((count = sourceStream.Read(buffer, 0, bufferLen)) > 0)

            {

                // save to output stream

                targetStream.Write(buffer, 0, count);

            }

            targetStream.Close();

            sourceStream.Close();

        }

    }

Changing in Web.Config File in Wcf (Server Side):-

The following settings are most important for transferring large data:

·         ReaderQuotas: We have to set the maximum sizes (this depends on our specific requirement). Here I have set to the maximum values where we can transfer data up to 2GB, as per MSDN/www documentation.   <binding name="TransferService"

maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" transferMode="Streamed" > <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/>

 A word about my experiences here: I have used the above settings alone and received the error “400 bad request” from the WCF service on the browser.This error may occur due to many reasons: the reasons might be configuration mismatch between the web server and the WCF service, or an exception raised in the WCF service etc.

BindingConfiguration: This attribute is not available by default in the endpoint section. When I added this attribute, the “400 bad request” exception disappeared and the upload and download executed well.

<endpoint address="" binding="basicHttpBinding"

          bindingConfiguration="TransferService"

          contract ="ITransferService">

</endpoint>

Along with the above settings, HttpRuntime settings should also be placed in the web.config file as below:

<httpRuntime maxRequestLength="2097151" //Maxvalue

     useFullyQualifiedRedirectUrl="true" executionTimeout="14400"   />  //can be configured as per the requirement.

Create Web Site Or Client or Calling To Services :-

Create a new “web site” project. Place a link button and a file upload control on the web page. Create one more button to upload the file. Add the reference of the WCF service in “Service References” with a suitable name, currently FileTransferServiceReference.

The following changes need to be done in web.config after adding the service reference: 

<binding name="BasicHttpBinding_ITransferService" closeTimeout="04:01:00" openTimeout="04:01:00" receiveTimeout="04:10:00" sendTimeout="04:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="2147483647" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text" textEncoding="utf-8" transferMode="Streamed" useDefaultWebProxy="true">

<readerQuotas maxDepth="128" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />

<security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" />

<message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding>

Increase the values for the readerQuotas attribute and also increase the timeout settings.  

The code-behind of the page is the following:

protected void LinkButton1_Click(object sender, EventArgs e)

 {

     try

       {

 FileTransferServiceReference.ITransferService clientDownload = new TransferServiceClient(); 

 FileTransferServiceReference.DownloadRequest requestData = new DownloadRequest(); 

 FileTransferServiceReference.RemoteFileInfo fileInfo = new RemoteFileInfo(); requestData.FileName = "codebase.zip";

 fileInfo = clientDownload.DownloadFile(requestData);

 Response.BufferOutput = false; // to prevent buffering 

 byte[] buffer = new byte[6500]; 

 int bytesRead = 0;

 HttpContext.Current.Response.Clear();

 HttpContext.Current.Response.ClearHeaders();

 HttpContext.Current.Response.ContentType = "application/octet-stream"; HttpContext.Current.Response.AddHeader("Content-Disposition", "attachment; filename=" + requestData.FileName);

 bytesRead = fileInfo.FileByteStream.Read(buffer, 0, buffer.Length); 

 while (bytesRead > 0)

   { 

 // Verify that the client is connected. 

      if (Response.IsClientConnected)

        {

       Response.OutputStream.Write(buffer, 0, bytesRead); // Flush the data to the HTML output. 

       Response.Flush(); 

       buffer = new byte[6500]; 

       bytesRead = fileInfo.FileByteStream.Read(buffer, 0, buffer.Length);

       } 

      else    {        bytesRead = -1;       }

    }

 }

   catch (Exception ex) 

      { // Trap the error, if any.

         System.Web.HttpContext.Current.Response.Write("Error : " + ex.Message);

      }

    finally

      { 

       Response.Flush(); 

       Response.Close();

       Response.End();  

       System.Web.HttpContext.Current.Response.Close();

       }

   } 

 protected void Button1_Click(object sender, EventArgs e)

  {

   if (FileUpload1.HasFile) 

   {

System.IO.FileInfo fileInfo = new System.IO.FileInfo(FileUpload1.PostedFile.FileName); FileTransferServiceReference.ITransferService clientUpload = new FileTransferServiceReference.TransferServiceClient(); FileTransferServiceReference.RemoteFileInfo uploadRequestInfo = new RemoteFileInfo();           

using (System.IO.FileStream stream = new System.IO.FileStream (FileUpload1.PostedFile.FileName,                        System.IO.FileMode.Open, System.IO.FileAccess.Read))

  {   

     uploadRequestInfo.FileName = FileUpload1.FileName;

     uploadRequestInfo.Length = fileInfo.Length;

     uploadRequestInfo.FileByteStream = stream;

    clientUpload.UploadFile(uploadRequestInfo);

   //clientUpload.UploadFile(stream);

    }

  } 

}

Now build both the IDE projects and execute the web server project. This still works only for less than 50KB! If you select a large file to be uploaded, you will see a blank webpage.

Now, you need to add one more attribute, MaxRequestLength, in the httpRuntime section in thesystem.web configuration file section, as below:

<httpRuntime maxRequestLength="2097150"/>

That is it! Now one can download and upload large files (I have tested up to ~1GB) from an IE6 browser over HTTP to a WCF service. 

Ref:  http://www.codeproject.com